Pitney-bowes DM900 Manual de usuario Pagina 153

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 186
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 152
DM800™, DM900™ Digital Mailing System Operating Guide
SV60861 Rev. F 10-7
Envelope(s) getting
jammed
Envelopes dimensions are
outside the acceptable range
(piece of mail is too thick,
pieces of mail are incorrect
size, etc.) for mailing system.
Feeder adjustment is set too
hig
h
.
Refer to the Specifications section in this guide
for
the acceptable envelope dimensions.
To clear a jam in the feeder area:
1. LIft the feeder cover.
2. Lift the feeder roller jam release levers and
re
m
ove the piece of mail.
To clear a jam in the transport area:
1. Lift the main cover.
2. Pull the transport jam release lever
to the
lef
t until the assembly lifts up.
3. Remove the piece of mail.
4. Push the transport deck back to its original
po
sition until it snaps into place.
If condition persists adjust the thickness adjust-
ment knob for less tension (see procedure in
this chapter).
Envelope Feeding Problems
Description Possible Causes Solution
Jam Release Levers
Transport Jam
Release Lever
Transport assembly lifts up.
Vista de pagina 152
1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 185 186

Comentarios a estos manuales

Sin comentarios