Pitney-bowes DM925 Manual de usuario Pagina 171

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 206
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 170
DM925
Digital Mailing System Operating Guide
SV62207 Rev. B 10-5
Envelope Feeding Problems
Description Possible Causes Solution
More than one enve-
lope is feeding.
Too many envelopes are on the
fe
ed deck; envelopes are not
stacked properly on the feed deck.
Remove some of the envelope and test
with a smaller stack.
Slant the envelopes slightly
to the left (shin-
gled).
Put thinner envelopes on top of thicker
e
nvelopes in feeder.
Envelopes are too thick/thin for
feed
er adjustment, or thickness
adjustment knob is set improperly.
OR
Thickness adjustment knob is set
too wide
.
Adjust the thickness adjus
tment knob to corre-
spond to the envelope thickness.
For thicker pieces of mail (3/8” to 5/8”), or
m
ail containing several inserts, use the
thick mail setting. For most mail under 3/8",
use the normal mail settings.
For large stacks of thin
mail, such as single
inserts or post cards, the thin mail setting
may be needed for better performance. .
Backstop is too close and is forc-
ing mail into the feeder.
Readjust backstop and restack mail.
Normal Mail Setting
Thick Mail
Setting
Thin Mail
Setting
Vista de pagina 170
1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 205 206

Comentarios a estos manuales

Sin comentarios