Pitney-bowes DM875 Series Manual de usuario Pagina 183

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 182
DM825™ and DM875™ Series Digital Mailing System Operating Guide
SV62200 Rev. C 10-7
Envelope(s) getting
jammed (continued)
You are using envelopes that
have dimensions that are outside
the acceptable range. (continued)
To clear a jam from the transport deck:
1. Pull out on the transport release knob.
2. Remove the envelope.
3. If the jam occurred before the system
applied postage to the envelope, the sys
-
tem will now print the postage on a tape.
4. Apply the postage tape to the envelope.
5. Push the transport deck back up until it
snaps into position.
6. Make sure the transport deck is level with
the feed deck.
7. Run a test pattern to make sure the print-
head isn’t damaged. Refer to the Printing a
Test Pattern section in Chapter 9 in this
guide.
Envelope Feeding Problems
Description Possible Causes Solution
Transport Release Knob
Transport Deck
Vista de pagina 182
1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 209 210

Comentarios a estos manuales

Sin comentarios