Pitney-bowes DI425 FastPac Inserting Systems Manual de usuario descargar pdf (Pagina 55)

OMR • 3

3-17SV61656 Rev.A

Fold a sheet of material in half and measure the distance from the

side of the form to the middle as shown.

For an A4 size form, this

measurement is 105mm.

For a letter-size sheet (8.5

x 11 inches), it is 108mm.

Now measure the distance

from the edge of the form

to the middle of the scan

dash marks, as shown.

Then subtract this mea-

surement from the half-fold

measurement.

Example:

For an A4 size form, the

half fold measurement is

105mm.

If the distance from the

edge of the form to the

middle of the scan dash

marks is 10mm, the scan-

ning head setting will be

95mm (105mm minus

10mm).

Loosen the knurled locking knob and set the relevant scanning head

to the correct setting.

Retighten the locking knob.

If you’ve adjusted the bottom sheet feeder scanner, install both sheet

feeder 2 and the fold plate located below sheet feeder 2.

105mm

10mm

Locking knob

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 99 100

Sin comentarios

Pitney-bowes DI425 FastPac Inserting Systems Manual de usuario Pagina 55